Chiltern Thrust Bore Add to HDD Fleet

Chiltern Thrust Bore, based in Olney, have recently taken delivery of a new Vermeer D36x50 Horizontal Directional Drilling (HDD) rig. The equipment, supplied by Vermeer UK, allows the company to expand the range of operations they offer to custom.

Read more >


Chiltern Thrust Bore Compliant to Work on all Transport for London Projects

Network Rail and Transport for London (TfL) have signed an agreement to extend the use of Sentinel cards to London Underground and its supply chain. Image Source: Rail Technology Magazine All Chiltern Thrust Bore (CTB) employees have Sentinel card.

Read more >


Crossrail C300/410

Chiltern Thrust bore Ltd have been awarded there first section of works on the mighty Crossrail Project. This section of works involves the installation of drainage at 3 cross- passage sections of the tunnel at Westbourn Park. We are mobilizing our.

Read more >


Network Rail

CTB have just been awarded our fifth section of works in North London for Network Rail. This includeds one 3x6 metre coffer dam, 60 metres of 610mm steel sleeve to be installed beneath the rail infrastructure, sub ducting , grouting of the steel sl.

Read more >


Severn Trent Water

CTB mobilised to Coventry  to install  1.8 kilometres of 250mm SDR11 rising main in a carriageway using horizontal directional drilling.   

Read more >


Priory Farm, Solar Farm

Having visited this project previously to install ducting from the solar farm across a brook and fields we get the call at the eleventh hour to drill In Carlton Colville village, so the client can make the final conection and be ON-LINE !  CTB bale.

Read more >


Double Bank Lane Solar Farm

Chiltern Thrust Bore mobilised to Double Bank Solar Farm near Huntingdon to install 250metres of 250mm cable duct  beneath a SSSI site. Lets hope the rain holds off !! 

Read more >


Orchard Close

Orchard close continues 

Read more >


Early start for CTB after the festive break

Mobilised our D80x100 HDD rig and equipment to Peterborough Gateway, ready for quick start on the 6th Jan  Third and final phase on this project: 240 metres of 250mm rising main  186 metres of twin 180mm cable ducts  186 metres of 315mm gas main.

Read more >


Peterborough Gateway

After successfully completing the installation of 300mm Denlok Clay pipe by Guided Auger Boring in phase one,Chiltern Thrust Bore mobilised our  D4045 to Nene Parkway, to start the second phase, and the first of two sections of Horizontal Directiona.

Read more >